Arc Flash Training & Certification

Hands-on CSA Z462:24 electrical safety training that keeps your crews safe around energized equipment.

Get a Quote Onsite Training Courses

We come to you. Your workers train with real arc-rated PPE, rubber insulating gloves and test instruments, and learn to read the arc flash labels on your own equipment, at your site, on your schedule.

Electrical worker in hard hat and gloves testing equipment
Circuit breaker panel
COURSE HIGHLIGHTS

What Your Workers Learn

  • How electric shock, arc flash and arc blast injure workers, and what causes them
  • Employer, supervisor and worker duties under Part 38 (Electrical Safety) and the CSA Z462:24 standard
  • Qualified and unqualified workers, the hierarchy of risk controls and condition of maintenance
  • Creating an electrically safe work condition: lockout and live–dead–live testing
  • Shock and arc flash approach boundaries and arc flash risk assessment
  • Reading arc flash labels and choosing the right PPE category
  • Arc-rated clothing, rubber insulating gloves, leather protectors and insulated tools
  • Energized electrical work permits, job briefings and electrical emergency response

Hands-On, With Real Gear

  • Inspect, put on and remove a complete arc-rated PPE kit, including face shield, balaclava and hearing protection
  • Inspect and air-test Class 0 rubber insulating gloves and leather protectors
  • Check a test meter and complete a live–dead–live test on a proving unit
  • Read real arc flash labels, take part in a job briefing, then complete the written test and practical evaluation

Why Train With PWST

  • Every worker completes a hands-on practical evaluation. No videos, no slideshows.
  • Training is delivered onsite and tailored to your equipment, arc flash labels and safe work procedures.
  • Built on the 2024 edition of CSA Z462 and Part 38 (Electrical Safety) of the Manitoba Workplace Safety and Health Regulation, M.R. 217/2006.
  • Scheduled around your operation: days, evenings, midnights or weekends.
  • Digital diploma and wallet-size certificate issued by Province Wide Safety Training Ltd., with training records you can show an inspector.

Key Details

  • Course length is one full day, about 7 hours of instruction.
  • Certificates are valid for 3 years, matching the CSA Z462 retraining interval.
  • For electricians and apprentices, maintenance, HVAC and instrument technicians, operators who work near electrical equipment, and supervisors.
  • Up to 16 people per session, with a 4-person minimum charge for onsite training.
  • Group rates available. Call 204-415-7451 or email info@provincewidesafetytraining.ca for a quote or to book training.
  • Download the course overview (PDF)
COMMON QUESTIONS

Is arc flash training required in Manitoba?

  • Yes. Part 38 (Electrical Safety) of the Manitoba Workplace Safety and Health Regulation requires employers to protect workers from electrical hazards, develop safe work procedures and train workers in them. CSA Z462, Canada's workplace electrical safety standard, sets out how to manage shock and arc flash risk, including training. Our course is built on the 2024 edition (CSA Z462:24).

Who needs arc flash training?

  • Anyone who works on or near energized electrical equipment: electricians and apprentices, maintenance workers, millwrights, HVAC and instrument technicians, operators who open panels or reset breakers, and the supervisors and safety staff responsible for them.

How long is arc flash certification valid?

  • PWST arc flash certificates are valid for 3 years. CSA Z462 requires workers to be retrained at least every 3 years, and sooner when their tasks, equipment or safe work procedures change, or when an inspection shows they are not following safe practices.

Does this course make my workers qualified?

  • Under CSA Z462, the employer decides who is a qualified person, based on training, demonstrated skills and knowledge of the specific equipment and hazards. Our course provides the training and a documented hands-on practical evaluation that support that decision.

Where is the training held?

  • At your workplace, using your own equipment and arc flash labels. We travel to Winnipeg, Brandon, Steinbach, Thompson, Kenora and surrounding areas, and across Manitoba, Northwestern Ontario and Eastern Saskatchewan.

How many people can attend?

  • Up to 16 people can attend one session, and onsite training has a 4-person minimum charge. Group rates are available. Call 204-415-7451 or email info@provincewidesafetytraining.ca for a quote or to book training.

Do we need to supply arc flash PPE?

  • No. PWST brings a complete arc-rated PPE kit, rubber insulating gloves, a test meter and a proving unit for the practical. Workers are welcome to bring their own PPE so we can inspect it with them.

Our equipment does not have arc flash labels yet. Can you still train us?

  • Yes. We bring sample arc flash labels to every course, so your workers learn to read them, and we explain what an arc flash risk assessment should give you. Many employers book training while their labelling project is under way.

Contact Us

If you have any questions or would like to make arrangements to have training scheduled 

 Call Us

+1 204-415-7451

 Location

Onsite workplace safety training in Winnipeg, Brandon, Steinbach, Thompson, Kenora and surrounding areas, and across Manitoba, Northwestern Ontario and Eastern Saskatchewan. Training in Nunavut and the Northwest Territories by arrangement.

    Province Wide Safety Training Ltd. (PWST)

    Onsite workplace safety training and consulting across Manitoba, Northwestern Ontario and Eastern Saskatchewan.

    Canadian Red Cross Training PartnerCanadian Red Cross Training Partner for First Aid and CPR.

    SiteDocs Silver Safety Consultant Partner logoSiteDocs Safety Consultant Partner for digital safety forms and records.

    204-415-7451
    info@provincewidesafetytraining.ca

    Office: Monday to Friday, 8 am to 5 pm
    Training: any time, including evenings, nights and weekends

    Get a Quote

    Popular Courses

    Service Areas

    Company